Barco TransForm ECU 200 Video Wall Controller

100% of 100
Standalone Video Wall Controller, Supports High Quality Graphics, extendable to a full networked Controller, Support for screen resolutions up to 4K and Universal IP Access
As low as $13,414.00
Availability: In stock
Shipping Cost: $395
  • Standalone Video Wall Controller
  • High Quality Graphics Support
  • Can be easily extended to a full networked Controller
  • Drives up to the largest video walls with all outputs synchronized
  • Support for screen resolutions up to 4K


Barco ECU-200 Video Wall processor:

The latest generation Barco’s TransForm ECU-200 is a heavy duty video wall processor, designed exclusively for larger control rooms. Equipped with a brand new Intel QuadCore CPU and 3rd generation PCI Express, TransForm ECU-200 has the ability to load and deliver substantial amount of data with smooth visuals. The user-friendly Windows OS allows you to operate TransForm ECU-200 without any external sources. The pre-installed Barco’s Control Room Management Suite (CMS) enables you to operate the Barco’s TransForm ECU-200 video wall controller individually, by providing all the networking and IP streaming capabilities.


High Quality Graphics Support for very large displays:

With the standard PCIe 3.0 slots and high-performance graphics output cards, the TransForm ECU-200 is capable of supporting all video sizes with up to 4k resolution quality.


Standalone wall controller or fully networked

TransForm ECU-200 incorporates the new generation Intel® Core™ i7 Quad Core processor and high density multi-GPU graphics system that will let you run all kinds of applications and video sources with rich visuals on the entire video wall. The Control Room Management Suite (CMS) enables you to transform the Barco’s ECU-200 into a fully integrated network TransForm N system. However, the TransForm ECU-200 has the ability to act as a standalone wall controller with many single wall installations. You can even get access to almost any IP streams by configuring the TransForm ECU-200 with a single or multiple Stream Capturing Units (SCU). TransForm ECU-200 has the latest input modules that support high number of DVI/RGB- and Analog Video sources. The PCIe 3.0 switch matrix integrated with optional extenders, provides twice the bandwidth than the previous PCIe 2.0 version.


Ease of use and reliability:

The Control Room Management Suite (CMS) software installed in TransForm ECU-200, has number of amazing features that let you run applications and other sources on the video wall. However, another easy to use feature ‘sider bar’, enables interaction between the members in a control room. With all these extraordinary and unique functions, the TransForm ECU-200 offer perfect solution for the needs of a control room at a competitive price.

Basic Attributes
Product NameBarco TransForm ECU 200 Video Wall Controller
Warranty2 years warranty
Built-in PCYes
Operating SystemWindows 7 64bit Ultimate Version
Power Requirement100-240VAC 800W+800W, Hot-plug Redundant
CPU Frequency 3.1GHz (up to 3.9GHz)
Network ConnectivityLAN
Dimensions19" Rackmount
Ship cost395
Country of OriginBelgium
Write Your Own Review
You're reviewing:Barco TransForm ECU 200 Video Wall Controller
Your Rating
Name Barco TransForm ECU 200 Video Wall Controller(2x 4K Outputs)
Model TransForm ECU-200
CPU Intel(R) Core(TM) i7 Quad core processor 3.1GHz (3.9GHz max. Turbo frequency)
CPU frequency 3.1GHz (up to 3.9GHz)
Memory 16 GB RAM
Hard disk 2x 750 GB RAID-1, Hot-plug redundant
Optical drive DVD R/W
Network  2x 1 Gb/s LAN
System backplane 11-slot PCI Express 3.0 Switch Fabric backplane
System expansion With up to 2 expansion chassis the system can be configured to support up to a total of 31 input and output cards
Graphics card 4ch Graphic card Max resolution: 2560x1600@60Hz (Display Port), 3840x2160@30Hz (Display Port, 2ch/card), 1920x1200@60Hz (DVI), Up to 64 HD displays, Up to 128/256 Barco HD/WXGA displays, Supports Windows desktop size up to 32768x32768 pixel
DVI 4ch DVI Input Card, supporting • DVI signals up to 1920x1200@60Hz • RGB signals up to 170 Mpixel • Up to 64 DVI sources per system • HDCP (supported on Barco Display Control DCS only)
DVI-DualLink 2ch Display Port 1.2 Input Card, supporting • Display Port signals up to 4096x2160@60 Hz • Up to 32 Display Port sources per system • HDCP (supported on Barco Display Control DCS only)
Analog video inputs 8ch Analog Video Input Card, supporting • PAL (B, D, G, H, I, M, N), PAL-60 • NTSC M, NTSC 4.43 • SECAM • Input formats Composite, S-Video
IP Streaming Input Stream Capture Unit SCU • Multiple standards supported: MPEG2, MPEG4, H.264, MJPG, V2D (Check supported encoders reference list) • Up to 24/8 SD/HD streams per SCU Model D • Up to 12/4 SD/HD streams per SCU Model S • Up to 8 SCU’s per ECU-200, IP streaming requires the Barco Control Rooms Management Suite to be installed!
Dimensions 19" Rackmount
Power supply 100-240VAC 800W+800W, Hot-plug Redundant
Temperature Operating: 0°C to 35°C (32°F to 98°F) Non-operating: -20°C to 70°C (-4°F to 158°F)
Software (Management) Barco Control Rooms Management Suite CMS, Barco Display Control DCS (alternative option)
Software (OS) Windows 7 64bit Ultimate Version
EMC (Certification) CE, FCC Part 15 Class A, CISPR 22, ICES­003
Safety UL/CSA/EN/CCC/BIS/IEC 60950­1 CB report
Available models R9839200: ECU-200, system Configuration customer defined

Barco TransForm ECU 200 Video Wall Controller (2x 4K Outputs)

  • Brochure
  • Q. What is a video wall controller?

    A. Video wall controller is a main hub that manages the content over the video walls such as displaying the content on a single or multiple screens. Apart from that, a video wall controller eliminates the need of external pcs because it has its own built-in pc and Barco’s TransForm CU-200 is equipped with the latest generation components.


    Q. Is there any Optical drive in the TransForm ECU-200 video wall controller?

    A. Yes, there is a DVD R/W drive fitted in the TransForm ECU-200 video wall controller.


    Q. What OS does the TransForm ECU-200 support?

    A. Barco’s TransForm ECU-200 runs on the Windows OS.


    Q. What features do I need to look for in a video wall controller?

    A. A high speed processor and dedicated graphics card for optimal performance. Multiple number of inputs/outputs such HDMI, VGA, DVI, USB 2.0, Ethernet etc. The Barco’s TransForm ECU-200 offer all of the up-to-date features in a competitive price.


    Q. Does the TransForm ECU-200 come with a warranty?

    A. Yes, the TransForm ECU-200 comes with 2 year warranty